This site requires JavaScript to be enabled
An updated version of this article is available

Telephony - How to forward your phone calls

1674 views

6.0 - Updated on 04-26-2022 by Sherri Graven (sbg13)

5.0 - Updated on 04-03-2021 by Joshua Piotti (jdp22)

4.0 - Updated on 12-09-2020 by Brent Korman (bak175)

3.0 - Updated on 04-07-2020 by Brent Korman (bak175)

2.0 - Updated on 03-12-2020 by Daniel Travis (drt82)

1.0 - Authored on 11-29-2017 by Brent Korman (bak175)

ARTICLE INTENDED FOR:

Faculty and Staff

INTRODUCTION:

How to forward calls received on your campus extension to another phone number (for those with Cisco VoIP Administrative Lines)

STEP-BY-STEP INSTRUCTIONS:

On your phone:

  1. Press the [Forward all] soft key below your phone's screen.  (You'll hear two beeps.)
  2. Dial the extension or external number to which you want your calls forwarded (just as you would normally dial it from your phone, including the '8' in front of an external number; you'll hear a beep and see a confirmation message on your display).  (Note that you can also press a preprogrammed speed dial button in place dialing the number).

To turn it back off:

  1. Press the [Forward off] soft key below your phone's screen.  (You'll hear a beep.)

From the portal:

  1. Go to "https://my.voip.psu.edu".  (You'll be prompted to login with your Penn State AccessID and Password.)
  2. Click on "Your Phone Settings".
  3. Click on "Call Forwarding".
  4. Check the box below your phone extension.
  5. Select from the pull-down or Type the extension or external number to which you want your calls forwarded (just as you would normally dial it from your phone, including the '8' in front of an external number)
  6. Click on [Save].

 To turn it back off:

  1. Perform steps 1-3 immediately above.
  2. Uncheck the box below your phone extension.
  3. Click on [Save].

Note that you can pair either method for turning forwarding on with either method for turning it back off.

LINKS: